Lighting

Torch, head torch or lantern for a power cut?

Choose a light for finding your way, keeping both hands free or lighting a table. Check what you own before buying, and compare batteries and runtime at a setting you would use.

Last reviewed 11 November 2026Elevated editorial risk

Short answer

Start with a working battery torch you can find in the dark. A handheld torch helps you see where you are going, a head torch keeps both hands free, and a battery lantern lights a shared area. One light may be enough for a short cut. The Cabinet Office advises using a torch in preference to candles and keeping spare batteries.

Which light fits the job?

Handheld torch
For checking a landing, finding a cupboard or passing a light to someone else. A simple switch and a grip you can hold matter more for those jobs than a long beam. Choose something hands-free if you also need both hands for the task.
Head torch
For reading labels, opening food or fetching things when both hands are busy. A broad low setting works well up close. Check that the band fits and that you can operate the button by touch. The beam follows your head, so angle it down when facing someone.
Battery lantern
For a table, a shared room or a fixed spot beside the bed. Look for a stable base and a setting that lights the area without glare. A small lantern can light a table without reaching a whole room, and a handheld torch is easier to aim along a route.

Try the light you have first

  1. Choose a place you can reach

    Keep the first light somewhere everyone who needs it can find, such as a bedside drawer. In a home on several floors, consider whether there is already a spare light on the other floor.

  2. Try an ordinary task

    While the mains lights are available, try finding and switching on the torch by touch. Use it to read a label or light the table. If someone struggles with the button, glare or battery compartment, use that to decide what to change.

  3. Set aside a spare power source

    Keep the correct spare batteries or the specified charging cable where you can find them. Check whether your radio and light can share the same type of battery, including the chemistry their manuals allow.

  4. Save your phone charge

    Use a separate torch if one is available. The Be Ready guidance points out that the phone torch uses charge you may need for calls and updates.

What happens when the batteries run down?

  • Replaceable batteries let you get the light working again with compatible spares. Check the number, size and battery type on the exact model. Two batteries of the same shape are not necessarily interchangeable.
  • A rechargeable light is convenient if you already keep it charged. Check the charging cable and power source. If you plan to use a power bank, confirm that both devices and the cable are compatible while you still have mains power.
  • Some lights accept an approved rechargeable pack and ordinary batteries. Check which batteries the light can use and which it can charge. Follow the manual and never try to recharge disposable cells. A light that uses the same spares as your radio may be easier to keep ready than another charging system.

Read the runtime for the setting you need

Lumens describe light output. A tight beam and a diffused beam put that light in different places. For a table, a spread of light matters more than beam distance. For finding your way, check whether you can see the floor and where you are heading.

Compare each maker's runtime at the brightness setting and with the battery type you expect to use. Petzl's explanation of ANSI/PLATO FL 1 says the burn time ends when output has dropped to 10% of the light level measured shortly after switch-on. The light can be much dimmer before that point. Treat boost and reserve lighting as separate from a normal setting.

For example, Petzl lists its TIKKA E061AB series at 100 lumens for 12 hours on the Standard setting with three AAA batteries, and 350 lumens for two hours on the highest setting with those batteries. The head torch keeps your hands free, but its beam moves with you.

Ledlenser lists its ML4 502053 lantern at 50 lumens for eight hours on Mid Power and 5 lumens for 45 hours on Low Power. The maker does not list a runtime at the 300-lumen boost setting. The lantern accepts compatible AA spares as an alternative to its rechargeable battery, but the specification does not give separate runtime figures for those spares.

These are manufacturer figures. Neither table tells you how much of your room will be lit or how long an older battery will last. Use the published figures to compare settings, then try the light at the place you expect to use it.

Keep the light ready to use

Use a battery light instead of a candle.

Choose the charger and cable specified by the maker. London Fire Brigade advises against covering charging devices or leaving them plugged in after charging is complete. Stop charging if a battery starts to swell, turn the device off and seek the maker's advice.